ELASTOMER GLEITLAGER
Non-armed elastomeric NEG brackets with AbP (General Construction Supervision Certificate)
For all spot holders with larger playing space at pressures up to 5N / mm2. Low friction coefficient and maximum operational stability are ensured by precise planning. Elastomer slide holders absorb the horizontal displacements of the sliding plate on the pivot support. At the same time, it ensures a controlled load distribution and compensates for systematic torsion in poles, as well as unevennesses and deviations of surface parallelism.
Friction coefficient 0.01 to 0.05 at 23 ° C. Standard displacement: ± 20 mm.
The following values are characteristic values.
Armed elastomeric bearings Type B1EG with AbP (General Construction Supervision Certificate).
For all point spacers with larger playing space at characteristic compressions of up to 15N / mm2. The low friction coefficient and maximum operating stability are ensured by high-quality sliding planning. Elastomeric elastomeric elastomeric elastomeric holders according to DIN 4141, Part 14/140 or EN 1337-3 by design and material. By comparison, the small vertical loads and the allowed turning angles result in a maximum level of safety for Class 1 supports according to DIN 4141, Part 3, and are based on decades of experience with extensive use in bridges. They absorb the horizontal displacements by moving the slide plate on the carrier. At the same time they provide a controlled load distribution and compensate systematic torsional support as well as inequalities and deviations from the parallelism of the surfaces.
Supports for beams and support posts with larger play space and larger loads on the surface
Friction coefficient 0.01 to 0.05 at 23 ° C. Standard displacement: ± 20 mm.
Type B1EG, exception tables
The following values are characteristic tasks.
